Software Updated on Zrch.21 E7-2 chassis
Some customers may need to reboot IPTV equipment. Possibly other equipment as well if they didn’t come back on their own.
Free Preview Nov 28 Update
Kelli Phillips [8:31 AM] Fight Channel went ON free preview this morning and is on until December 31st. Forgot to post that E! went off preview on the 22nd
Hensall Nodes Upgraded This Morning
Early this morning Hensall Cable Nodes were upgraded. Some customers have called in reporting troubles but most are back up and running as it was due to the work that finished 1-2 hours ago. Going by the time most modems seem to have come up.
Dashwood Hydro Planned Outage
https://www.festivalhydro.com/site/#!/outages/content?page=notification A power interruption on Wednesday, November 28th, 2018 will affect the entire Village of Dashwood. The planned interruption is scheduled to commence at approximately 8:00 AM and continue until approximately 11:00 AM. (3 hours). Hydro One Lines Construction is performing an upgrade in the area, and this necessary outage …
IPTV Entone Via MoCA and Bridged Ethernet Port for Internet Tip:
Entone STB fed over MoCA can also be set up in some cases to provide Internet through the ethernet port on the Entone. For Example: MoCa -> Entone -> 804Mesh or 844E If you have this setup and the STB will not boot, unplug the ethernet from the back of …
A MoCA Troubleshooting Tip
We had some issues where STBs would not easily boot back up when the power came back on. The MoCA setup seems to be finicky in some cases. Or it is also sometimes due to the MoCA not being hooked up correctly in the first place, which we have seen …
No longer need due to Power Outage: IPTV STBs Maintenance Reboot 3AM Friday Nov 23rd
Nov 27, Canceling. Nov 22 3:31PM: We are holding off on this reboot until further notice. We need to test the new software a bit more with regards to MoCA fed STBs with the ports bridged feeding an Internet AP or Router. IPTV STBs will be scheduled to do a …
Reminder To Delete Temporary Port Forwards to ActionTechs, Airsonics, etc…
Kevin Gingerich [11:31 AM] Also, if we are accessing Airsonics behind a router via port forwarding we should disable the forwarding when we are done. I think this is the case with: Compromised host used for an attack: 163.182.229.66 An IP address (163.182.229.66) under your control appears to have attacked …